Read the product description before installing the flooring
Make sure the floor is levelled prior to installation
If the flooring have slight colour variation, please rearrange appropriately before installation
There must be at least a 1.2cm gap between the edge of the flooring and the wall.
After installation is complete, please avoid direct sunlight or wet areas.
After installation is complete, coat the flooring with a layer of wax to avoid damages to the surface.
Laminate Floor Instructions map

1. install vapor barrier (0.2 mm PE film) and underlay	2. lay panels close together on floor	3. lock in half-length panel with rotating motion
4. observe clearances	5. dock in panel lengthwise	6. link panels transversely
7. continue in stepped fashion	8. Rotate offcut section through 180° and mark accordingly	9. shorten last panel, rotate through 180° and slot in
10. fit panel using drawbar	11.start the next row with the leftover section (min.40cm)	12. cut last row to size
13. allow for expansion	14. ensure floor is able to "float"	15. expansion joints
16. Done!